ProForm 10.0 Ze Elliptical English Manual - Page 7

3. Identify and orient the Upright (5) and the Top Cover (23) as shown. Slide the Top Cover upward onto the Upright. Have a second person hold the Upright (5) and the Top Cover (23) near the Frame (1). Locate the wire tie in the Upright (5). Tie the lower end of the wire tie to the Wire Harness (60). Next, pull the upper end of the wire tie upward out of the top of the Upright. Tip: To prevent the Wire Harness (60) from falling into the Upright (5), secure the Wire Harness with the wire tie. Tip: Avoid pinching the Wire Harness (60). Insert the Upright (5) into the Frame (1). Attach the Upright (5) with four M8 x 16mm Patch Screws (102) and four M8 Split Washers (103). Do not tighten the Patch Screws yet. Slide the Top Cover (23) downward. Do not press the Top Cover into the Frame (1) yet. 3 Wire Tie Avoid pinching the Wire Harness (60) 5 23 Wire Tie 102 103 102 60 1 102 103 103 102 7