ProForm 1205 Cst Treadmill English Manual - Page 9
Patch Bolts yet.
View all ProForm 1205 Cst Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
5. Next, insert the brackets on the Handrail (110) into the Uprights (91, 92). Make sure that no 5 wires are pinched. Console Assembly 110 91 110 92 6. Partially tighten three 3/8" x 1 1/4" Patch Bolts (2) with three 3/8" Star Washers (6) into the Right Upright (92); do not fully tighten the Patch Bolts yet. Repeat this step with the Left Upright (91). Then, firmly tighten all six 3/8" x 1 1/4" Patch Bolts (2). 6 91 26 2 6 92 7. Slide the Right Upright Sleeve (90) up against the console assembly. Attach the Right Upright 7 Sleeve with two #8 x 3/4" Tek Screws (24). Attach the Left Upright Sleeve (not shown) to the console assembly in the same way. Console Assembly 24 90 24 9
9
6.
Partially tighten three 3/8" x 1 1/4" Patch Bolts
(2) with three 3/8" Star Washers (6) into the
Right Upright (92);
do not fully tighten the
Patch Bolts yet.
Repeat this step with the Left Upright (91).
Then, firmly tighten all six 3/8" x 1 1/4" Patch
Bolts (2).
91
92
2
2
6
6
6
7.
Slide the Right Upright Sleeve (90) up against
the console assembly. Attach the Right Upright
Sleeve with two #8 x 3/4" Tek Screws (24).
Attach the Left Upright Sleeve (not shown) to
the console assembly in the same way.
24
90
24
7
Console
Assembly
5.
Next, insert the brackets on the Handrail (110)
into the Uprights (91, 92).
Make sure that no
wires are pinched.
5
92
91
110
Console
Assembly
110