ProForm 1280s Interactive Trainer Elliptical English Manual - Page 10
Plug the Power Cord 96 into the Power Socket 140
View all ProForm 1280s Interactive Trainer Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
13. Attach the Left Handlebar Cover (109) to the Console 13 (5) with three M4 x 16mm Screws (66). Attach the Right Handlebar Cover (110) in the same way. 5 See assembly step 11. Tighten the eight M6 x 16mm Tapered Button Screws (107). 110 109 66 66 14. Plug the Power Cord (96) into the Power Socket (140) 14 at the rear of the elliptical exerciser. 96 140 15. Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser. The elliptical exerciser is now fully assembled. If you have purchased the optional chest pulse sensor (see page 21), follow the instructions on page 21 and install the receiver included with the chest pulse sensor. 10