ProForm 130 Elliptical English Manual - Page 18

4. Hold the handgrip pulse sensor. It is not necessary to hold the handgrip pulse sensor continuously during a pulse control program; however, you should hold the handgrip pulse sensor frequently for the program to operate properly. Each time you hold the handgrip pulse sensor, keep your hands on the metal contacts for at least 30 seconds. After the first minute of the program, the Pace Coach will prompt you to maintain a consistent pedaling pace. When one of the "Too Slow" arrows lights, increase your pace. When the one of the "Too Fast" arrows lights, decrease your pace. When the center indicator lights, maintain your current pace. 5. Begin pedaling to start the program. Pulse control program 3 is divided into 30 oneminute segments. One target heart rate setting is programmed for each segment. Note: The same target heart rate setting may be programmed for two or more consecutive segments. The target heart rate setting for the first Current Segment segment will be shown in the flashing Current Segment col- umn in the center of the display. The target heart rate settings for the next four segments will be shown in the columns to the right. When only three seconds remain in the first segment of the program, both the Current Segment column and the column to the right will flash, a series of tones will sound, and all target heart rate settings will move one column to the left. The target heart rate setting for the second segment will then be shown in the flashing Current Segment column. Pulse control program 4 is divided into 40 oneminute segments. The same target heart rate setting is programmed for all segments. Note: For a shorter workout, stop exercising or select a different program before the program ends. During both pulse control programs, the console will regularly compare your heart rate to the target heart rate setting. If your heart rate is too far below or above the target heart rate setting, the resistance of the pedals will automatically increase or decrease to bring your heart rate closer to the target heart rate setting. IMPORTANT: The target heart rate settings are intended only to provide motivation. Your actual heart rate may be slower than the target heart rate settings. Make sure to exercise at a pace that is comfortable for you. Note: During the program, you can manually override the resistance setting for the current segment, if desired, by pressing the increase and decrease buttons. However, when the console compares your heart rate to the target heart rate setting, the resistance of the pedals may automatically increase or decrease to bring your heart rate closer to the target heart rate setting. If you stop pedaling for several seconds, a tone will sound and the program will pause. To restart the program, simply resume pedaling. 6. Follow your progress with the display. See step 4 on page 15. 7. Turn on the fan if desired. See step 6 on page 16. 8. When you are finished exercising, the console will turn off automatically. See step 7 on page 16. 18