ProForm 16.0 Ne Elliptical English Manual - Page 10
Attach the Front Stabilizer Cover 8 with two M4
View all ProForm 16.0 Ne Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
5. With the help of a second person, place some of the packing materials (not shown) under the 5 front of the Frame (1). Have the second per- son hold the Frame to prevent it from tipping while you complete this step. Identify the Right Front Stabilizer (6) and orient it as shown. Attach the Right Front Stabilizer (6) to the Frame (1) with three M10 x 20mm Screws (144); start all three Screws, and then tighten them. Attach the Left Front Stabilizer (not shown) in the same way. Then, remove the packing materials from under the Frame (1). 6. Orient the Front Stabilizer Cover (8) as shown, and route the Power Cord (not shown) over 6 the top of the Front Stabilizer Cover. Then, press the Front Stabilizer Cover onto the Frame (1). Attach the Front Stabilizer Cover (8) with two M4 x 16mm Screws (104). 144 1 6 8 104 1 10