ProForm 18.0 Re Elliptical English Manual - Page 14
Attach the Rear Console Cover 80 to - 18 0
 |
View all ProForm 18.0 Re Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
13. IMPORTANT: If you purchase the optional chest heart rate monitor (see page 27), see 13 step 18 on page 16 to install the receiver included with the heart rate monitor. Orient the Rear Console Cover (80) as shown. 101 Attach the Rear Console Cover (80) to the Upright (4) with four M4 x 16mm Screws (101). 101 4 80 14. While a second person holds the Console (7) near the Upright (4), connect the wires on the 14 Console to the Upper Wire (152), to the Right 7 and Left Sensor Wires (108, 110), and to the Extension Wire (162). Avoid pinching the wires Insert the excess wire into the Upright (4). Tip: Avoid pinching the wires. Attach the Console (7) to the Upright (4) with four M4 x 12mm Screws (148). 108, 110 162 4 152 148 14
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
14
14. While a second person holds the Console (7)
near the Upright (4), connect the wires on the
Console to the Upper Wire (152), to the Right
and Left Sensor Wires (108, 110), and to the
Extension Wire (162).
Insert the excess wire into the Upright (4).
Tip: Avoid pinching the wires.
Attach the
Console (7) to the Upright (4) with four M4 x
12mm Screws (148).
13.
IMPORTANT: If you purchase the optional
chest heart rate monitor (see page 27), see
step 18 on page 16 to install the receiver
included with the heart rate monitor.
Orient the Rear Console Cover (80) as shown.
Attach the Rear Console Cover (80) to the
Upright (4) with four M4 x 16mm Screws (101).
13
14
80
108,
110
148
152
162
4
4
7
101
101
Avoid pinching
the wires