ProForm 18.0 Re Elliptical English Manual - Page 9
Attach a Rear Stabilizer Tube 2 to the Frame
View all ProForm 18.0 Re Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
3. Identify the two Rear Stabilizer Tubes (2). While a second person lifts the rear of the Frame (1), insert some packaging materials (not shown) under the Frame. Have the second person hold the Frame to prevent it from tipping. Attach a Rear Stabilizer Tube (2) to the Frame (1) with three M10 x 20mm Screws (91) and three M10 Split Washers (105). Attach the other Rear Stabilizer Tube (2) in the same way. Next, tighten the Small Leveling Foot (136) into the Frame (1) in the indicated location. Then, remove the packaging materials. 3 2 4. Identify the Upright Cover (81). Orient the Upright Cover as shown, and slide it upward 4 onto the Upright (4). Have a second person hold the Upright (4) and the Upright Cover (81) near the Frame (1). Connect the Upper Wire (152) to the Lower Wire (111). 2 1 105 105 91 81 136 4 111 1 152 9