ProForm 225 Cse Elliptical English Manual - Page 24

MAINTENANCE AND TROUBLESHOOTING MAINTENANCE Regular maintenance is important for optimal performance and to reduce wear. Inspect and properly tighten all parts each time the elliptical is used. Replace any worn parts immediately. To clean the elliptical, use a damp cloth and a small amount of mild dish soap. IMPORTANT: Keep liquids away from the console and keep the console out of direct sunlight. During storage, remove the batteries from the console. Note: For clarity, the right pedal disc is not shown in the drawing below. Locate the Reed Switch (53). Loosen, but do not remove, the M4 x 16mm Screw (52). CONSOLE TROUBLESHOOTING Most console problems are the result of low batteries. To replace the batteries, see assembly 7 on page 10. If the handgrip heart rate monitor does not function properly, see step 5 on page 20. 53 58 HOW TO ADJUST THE REED SWITCH If the console does not display correct feedback, the reed switch should be adjusted. Using a standard screwdriver, remove the Top Shield (41). 41 52 61 Next, rotate the Pulley (61) until a Magnet (58) is aligned with the Reed Switch (53). Slide the Reed Switch slightly toward or away from the Magnet. Then, retighten the M4 x 16mm Screw (52). Rotate the Pulley for a moment. Repeat these actions until the console displays correct feedback. When the reed switch is correctly adjusted, reattach the top shield. 24