ProForm 225 Cse Elliptical English Manual - Page 7

ASSEMBLY • To hire an authorized service technician to assemble this product, call 1-800-445-2480. • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • Left and right parts are marked "L" or "Left" and "R" or "Right." • To identify small parts, see page 6. • In addition to the included tool(s), assembly requires the following tools: one adjustable wrench one Phillips screwdriver one rubber mallet Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.proform.com/registration on your computer and register your product. 1 • activates your warranty • saves you time if you ever need to contact Customer Care • allows us to notify you of upgrades and offers Note: If you do not have Internet access, call Customer Care (see the front cover of this manual) and register your product. 2. Identify the Front Stabilizer (63), which has Wheels (21). 2 Orient the Front Stabilizer (63) as indicated by the sticker. Make sure that the large holes in the Front Stabilizer are facing the Frame (1). While a second person lifts the front of the Frame (1), attach the Front Stabilizer (63) to the Frame with two M10 x 68mm Screws (34). 21 63 1 Large Holes 34 21 7