ProForm 225 Zlx Bike Uk Manual - Page 6
Assembly
View all ProForm 225 Zlx Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you complete all assembly steps. • To identify small parts, see page 5. • In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver one adjustable wrench Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Orient the Rear Stabilizer (14) as shown. 1 Tighten the two Leveling Feet (50) into the underside of the Rear Stabilizer (14). While a second person lifts the rear of the Frame (1), insert the Rear Stabilizer (14) into the Frame. Attach the Rear Stabilizer (14) with four M8 x 60mm Screws (43). 14 1 50 50 2. Orient the Front Stabilizer (2) as indicated by the sticker. 2 While a second person lifts the front of the Frame (1), attach the Front Stabilizer (2) to the Frame with two M10 x 80mm Screws (36). 43 2 36 1 6