ProForm 245 Zlx Bike Uk Manual - Page 8

5. Tip: Avoid pinching the wires. Slide the Upright (3) onto the Frame (1). Attach the Upright (3) with four M8 x 18mm Screws (35). Slide the Top Shield (9) downward and press it onto the Left and Right Shields (17, 18). 5 Avoid pinching the wires 3 9 35 35 17 1 18 6. See the inset drawing. Remove the Seat Knob (8) from the Seat Carriage (56). Next, attach the Seat (12) to the Seat Carriage (56) with four M8 Locknuts (37). Note: The Locknuts may be preattached to the underside of the Seat. Next, orient the Seat Carriage (56) and the Seat Post (5) as shown. Set the Seat Carriage on the Seat Post and hold it in place. Insert the Seat Knob (8) upward into the Seat Post (5), and tighten the Seat Knob into the Carriage Clamp (57) inside the Seat Carriage (56). 6 56 57 8 5 12 56 37 8 8