ProForm 250 Spx Bike Uk Manual - Page 7
make sure that the Saddle is level and is, pointing straight ahead., Make sure that the, Adjustment
View all ProForm 250 Spx Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
5. Orient the Saddle (31) as shown. 5 Slide the Saddle (31) onto the Saddle Carriage (32); make sure that the Saddle is level and is pointing straight ahead. Then, tighten the two nuts (A) beneath the Saddle. 31 32 A 6. Orient the Handlebar Post (7) as shown. 6 Locate the Adjustment Knob (15) on the front of the Frame (1). Loosen the Adjustment Knob and pull it outward. Then, insert the Handlebar Post (7) into the Frame. Move the Handlebar Post (7) upward or downward to the desired position, release the Adjustment Knob (15) into an adjustment hole in the Handlebar Post, and then tighten the Adjustment Knob. Make sure that the Adjustment Knob is firmly engaged in an adjustment hole. 7 1 15 7. Set the Handlebar (8) on the Handlebar Post (7) and slide it to the desired position. 7 Attach the Handlebar (8) to the Handlebar Post (7) with the Adjustment Handle (10) and an M10 Washer (9). Note: The Adjustment Handle (10) functions like a ratchet. Turn the Adjustment Handle in the desired direction, pull it downward, turn it in the opposite direction, push it upward, and then turn it in the desired direction again. Repeat this process as many times as necessary. 7 9 8 10 7