ProForm 280 Csx Bike English Manual - Page 8

IMPORTANT: If the Console has

Page 8 highlights

6. The Console (16) can use four D batteries (not included); alkaline batteries are recommended. 6 Do not use old and new batteries together or alkaline, standard, and rechargeable batteries together. IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before insert- ing batteries. Otherwise, you may damage the console displays or other electronic components. Remove the battery cover, insert the batteries into the battery compartment, and reattach the battery cover. Make sure to orient the batteries as shown by the diagram inside the battery compartment. To purchase an optional power adapter, contact the store where you purchased this product or see the cover of this manual. To avoid damaging the console, use only a manufacturer-supplied power adapter. Plug one end of the power adapter into the jack on the console; plug the other end into an outlet installed in accordance with all local codes and ordinances. 16 Batteries Battery Cover 7. While a second person holds the Console (16) near the Upright (13), connect the console wire to the Upper Wire Harness (36). Insert the excess console wire and Upper Wire Harness (36) downward into the Upright (13). Tip: Avoid pinching the wires. Attach the Console (16) to the Upright (13) with four M4 x 16mm Screws (49). 7 49 16 Console Wire 36 13 49 Avoid pinching the wires 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

8
6.
The Console (16) can use four D batteries (not
included); alkaline batteries are recommended.
Do not use old and new batteries together or
alkaline, standard, and rechargeable batteries
together.
IMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before insert-
ing batteries. Otherwise, you may damage
the console displays or other electronic
components.
Remove the battery cover, insert
the batteries into the battery compartment, and
reattach the battery cover.
Make sure to orient
the batteries as shown by the diagram
inside the battery compartment.
To purchase an optional power adapter, con-
tact the store where you purchased this
product or see the cover of this manual. To
avoid damaging the console, use only a
manufacturer-supplied power adapter.
Plug
one end of the power adapter into the jack on
the console; plug the other end into an outlet
installed in accordance with all local codes and
ordinances.
16
Batteries
Battery
Cover
6
7.
While a second person holds the Console (16)
near the Upright (13), connect the console wire
to the Upper Wire Harness (36).
Insert the excess console wire and Upper Wire
Harness (36) downward into the Upright (13).
Tip: Avoid pinching the wires.
Attach the
Console (16) to the Upright (13) with four M4 x
16mm Screws (49).
16
7
Avoid pinching
the wires
13
49
49
36
Console
Wire