ProForm 365p Treadmill Uk Manual - Page 11
How To Use The Manual Mode - treadmill manual
View all ProForm 365p Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
3 Stand on the foot rails of the treadmill. Find the clip attached to the key, and slide the clip onto the waistband of your clothes. Next, in- sert the key into the console. After a mo- ment, the track and the displays will light. Test Clip the clip by carefully taking a few steps backward until the key is pulled from the con- sole. If the key is not pulled from the console, adjust the position of the clip as needed. To stop the walking belt, press the Stop button. The Time/Pace display will begin to flash. To restart the walking belt, press the Start button or the Speed increase button. Note: During the first few minutes that the treadmill is used, inspect the alignment of the walking belt, and align the walking belt if necessary (see page 17). 4 Change the incline of the treadmill as desired. To change the incline of the treadmill, hold down the Incline increase or decrease button until the desired incline level is reached. HOW TO USE THE MANUAL MODE 1 Insert the key fully into the console. See HOW TO TURN ON THE POWER on pages 10 and 11. 2 Select the manual mode. When the key is inserted, the manual mode will be selected and the Manual Control indicator will light. If you have selected a speed program, press the Select Program button repeatedly to reselect the manual mode. 3 Press the Start button or the Speed increase button to start the walking belt. A moment after the button is pressed, the walking belt will begin to move at 1 mph. Hold the handrails and begin walking. As you exercise, change the speed of the walking belt as desired by pressing the Speed increase and decrease buttons. Each time a button is pressed, the speed setting will change by 0.1 mph. If a button is held down, the speed setting will change in increments of 0.5 mph. 5 Follow your progress with the track and the displays. The track-The track in the center of the console represents a distance of 400 meters (1/4 mile). As you walk or run on the treadmill, the indicators around the track will light in succession until the entire track is lit. The track will then darken and the indicators will again begin to light in succession. The center of the track will show the number of laps that you have completed. Distance display-This display shows the distance that you have walked or run. Time/Pace display- When the manual mode is selected, this display will show the elapsed time and your pace (pace is measured in minutes Indicator per mile). The display will alternate between one number and the other every few seconds, as shown by the indicators in the display. When a speed program is selected, the display will show the time remaining in the pro- gram and your pace. 11