ProForm 380e Treadmill English Manual - Page 11
If The Connectors Are Not Con
View all ProForm 380e Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
11. Attach the Left Handrail (89) to the console assembly with three M4.2 X 19mm Screws (1). 11 Start all three Screws before tightening any of them; do not overtighten the Screws. 1 89 Console Assembly 1 12. Have a second person hold the console assembly near the Right Upright (78). Cut the ties on the Right Handrail (90) and Left Handrail (not shown). If necessary, press the four Cage Nuts (38) back into place. Connect the Wire Harness (77) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Remove the wire ties from the Wire Harness and the console wire. Then, insert the connectors into the Right Upright (78). Set the console assembly on the Right Upright (78) and the Left Upright (not shown). Make sure that no wires are pinched. 12 90 38 77 78 Console Assembly Ties Console Wire Wire Tie Console Wire 77 11