ProForm 380e Treadmill English Manual - Page 12
Press the Latch Insert 70 into the Left Upright
View all ProForm 380e Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
13. Partially tighten four M8 x 25mm Bolts (6) with four M8 Star Washers (10) into the Uprights (73, 78) and the Handrails (89, 90). Then, tighten all four Handrail Bolts. See steps 5 and 8. Tighten the four M10 x 96mm Bolts (5). 13 89 6 10 6 73 6 90 10 10 6 78 14. Press the Latch Insert (70) into the Left Upright (73). It may be necessary to tap on the Latch Insert with a rubber mallet. Locate the Latch Pin Assembly (72). Remove the knob from the pin. Make sure that the collar and the spring are on the pin. Insert the pin into the Latch Insert (70), and tighten the knob back onto the pin. 14 Knob 70 Spring Collar Pin 72 73 15. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Keep the included hex keys in a secure place; the large hex key is used to adjust the walking belt (see pages 22 and 23). 12