ProForm 4.0 User Manual - Page 8

5. Set the Right Upright Spacer (79) on the Base 5 (83). Be careful not to pinch the Upright Wire (38). With the help of a second person, hold a Bolt Spacer (80) inside the lower end of the Right Upright (78). Insert a 3/8" x 4" Bolt (6) with 78 a 3/8" Star Washer (9) into the Right Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (80), 3/8" x 4" Bolt (6), and 3/8" Star Washer (9). Set the Right Upright in the Right Upright Spacer. Finger tighten the 3/8" x 4" Bolts (6); do not fully tighten the Bolts yet. Press a Base Endcap (77) into the Base (83). 6 79 9 38 77 80 83 6. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (56) so that the treadmill is more stable; do not fully fold the Frame yet. Attach a Base Pad (81) to the Base (83) in the location shown with a #8 x 1" Tek Screw (2) and a Base Pad Spacer (13). Then, attach another Base Pad (81) with only a #8 x 1" Tek Screw (2). Attach a Wheel (84) with a 3/8" x 2" Bolt (4) and a 3/8" Nut (8) that you removed in step 1. Do not overtighten the Nut; the Wheel must turn freely. 6 81 2 83 56 4 81 13 2 84 8 7. Set the Left Upright Spacer (76) on the Base 7 (83). With the help of a second person, hold a 6 Bolt Spacer (80) inside the lower end of the Left Upright (74). Insert a 3/8" x 4" Bolt (6) with a 3/8" Star Washer (9) into the Left Upright and 74 the Bolt Spacer. Repeat this step with a sec- ond Bolt Spacer (80), 3/8" x 4" Bolt (6), and 3/8" Star Washer (9). Set the Left Upright in the Left Upright Spacer. 9 77 76 Finger tighten the 3/8" x 4" Bolts (6); do not fully tighten the Bolts yet. Press a Base Endcap (77) into the Base (83). 80 83 With the help of a second person, tip the treadmill so that the Base (83) is flat on the floor. 8