ProForm 440r Instruction Manual - Page 11
Insert a Pedal Strap 29 through the Right Pedal
![]() |
View all ProForm 440r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
11. Identify the Stop Rod (35), which is slightly shorter than the Pedal Axle (not shown). Insert the Stop Rod (35) into the Frame (39) and center it. Next, slide a Pedal Stop (34), an M8 x 20mm Washer (16), and an M8 Split Washer (15) onto each side of the Stop Rod (35). Then, tighten an M8 Acorn Nut (31) onto each end of the Stop Rod (35) at the same time. 11 31 15 16 34 35 39 34 16 15 31 12. Insert the Pedal Axle (58) into the welded tube on the Frame (39) and center it. Next, slide a Pedal Spacer (32) and an M13 x 22mm Washer (33) onto each side of the Pedal Axle (58) (only one side is shown). Next, identify the Right Pedal (30) and the Left Pedal (57). Slide the Right Pedal onto the right side of the Pedal Axle (58), and slide the Left Pedal onto the left side of the Pedal Axle. Next, slide an M8 x 20mm Washer (16) and an M8 Split Washer (15) onto each side of the Pedal Axle (58) (only one side is shown). Then, tighten an M8 Acorn Nut (31) onto each end of the Pedal Axle (58) at the same time. 12 57 31 58 39 32 33 13. Insert a Pedal Strap (29) through the Right Pedal (30) as shown. Then, route the end of the Pedal 13 Strap through the buckle on the Pedal Strap. Attach the other Pedal Strap (29) to the Left Pedal (57) in the same way. 29 57 30 16 15 31 29 30 12
![](/manual_guide/products/proform-pfrw3914-instruction-manual-7623e34/11.png)