ProForm 455 Ekg Bike Uk Manual - Page 7
Attach the Handlebar 7 to the Handlebar Post 6
View all ProForm 455 Ekg Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
5. The Console (9) requires four 1.5V "D" batteries; 5 alkaline batteries are recommended. Press the tabs on the battery cover and remove the battery cover. Next, insert four batteries into the Console; make sure that the batteries are oriented as shown by the diagrams inside the Console. Then, reattach the battery cover. Batteries Battery Cover 9 6. Attach the Handlebar (7) to the Handlebar Post (6) with the Handlebar Clamp (22) and the Adjustment 6 Handle (10). Note: The Adjustment Handle works like a spanner. Turn the Adjustment Handle clock- wise, pull it away from the Handlebar, turn it coun- terclockwise, push it toward the Handlebar, and then turn it clockwise again. Repeat until the Handlebar is tight. 6 7 22 10 7. While another person holds the Console (9) near the Handlebar (7), connect the console wire harness to the Upper Wire Harness (51). Insert the excess wire downward into the Handlebar Post (6). Attach the Console (9) to the Handlebar (7) with four M4 x 16mm Screws (54). Be careful not to pinch the wire harnesses. 7 7 54 6 9 51 Console Wire Harness Avoid pinching the wire harnesses during this step 7