ProForm 5.0 R Bike English Manual - Page 19
Maintenance And Troubleshooting
View all ProForm 5.0 R Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the exercise cycle regularly. Replace any worn parts immediately. To clean the exercise cycle, use a damp cloth and a small amount of mild soap. IMPORTANT: To avoid damage to the console, keep liquids away from the console and keep the console out of direct sunlight. HOW TO MOVE THE EXERCISE CYCLE To move the exercise cycle, hold the handle on the rear stabilizer and carefully lift it until the exercise cycle can be moved on the front wheels. Carefully move the exercise cycle to the desired location and then lower it. CONSOLE TROUBLESHOOTING If the console display becomes dim, the batteries should be replaced; most console problems are the result of low batteries. See assembly step 5 on page 7 for replacement instructions. If the handgrip pulse sensor does not function properly, see step 5 on page 13. Wheel HOW TO LEVEL THE EXERCISE CYCLE After the exercise cycle has been moved to the loca- tion where it will be used, make sure that the ends of both front stabilizer are touching the floor. If the Leveling Foot exercise cycle rocks slightly dur- ing use, turn one or both of the leveling feet under the front stabilizers until the rocking motion is eliminated. Handle 19