ProForm 525 Si Treadmill English Manual - Page 6

moving.the

Page 6 highlights

4. With the help of a second person, carefully lower the Left and Right Uprights (1, 44) until the handrails are resting 4 on the floor. Handrails 5. Attach six Base Pads (57) to the bottom of the Base (59) in the indicated locations. Note: An extra Base Pad may 5 be included. (See drawing 4 above.) With the help of a second person, raise the Left and Right Uprights (1, 44) until the Base (59) is resting flat on the floor. Before moving.the treadmill, see HOW TO MOVE THE TREADMILL on page 11. 6. Align the holes in the Book Rack (62) with those in the Console (9). Attach the Book Rack to the Console with 6 the four remaining Screws (75) as shown. 7. Remove the backing from the Adhesive Clip (77). Press the Adhesive Clip onto the Rear Roller Endcap (78) in the 7 indicated location. Press the Allen Wrench (76) into the Adhesive Clip. Make sure that all parts are tightened before you use the treadmill. Note: To protect the floor or carpet, place a mat under the treadmill. For information on ordering a mat, see ORDERING REPLACEMENT PARTS on the back cover. 6 59 57 59 62 75 75 9 k 78 76

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

4.
With
the
help
of
a
second
person,
carefully
lower
the
Left
and
Right
Uprights
(1,
44)
until
the
handrails
are
resting
on
the
floor.
5.
Attach
six
Base
Pads
(57)
to
the
bottom
of
the
Base
(59)
in
the
indicated
locations.
Note:
An
extra
Base
Pad
may
be
included.
(See
drawing
4
above.)
With
the
help
of
a
second
per-
son,
raise
the
Left
and
Right
Uprights
(1,
44)
until
the
Base
(59)
is
resting
flat
on
the
floor.
Before
moving.the
treadmill,
see
HOW
TO
MOVE
THE
TREADMILL
on
page
11.
6.
Align
the
holes
in
the
Book
Rack
(62)
with
those
in
the
Console
(9).
Attach
the
Book
Rack
to
the
Console
with
the
four
remaining
Screws
(75)
as
shown.
7.
Remove
the
backing
from
the
Adhesive
Clip
(77).
Press
the
Adhesive
Clip
onto
the
Rear
Roller
Endcap
(78)
in
the
indicated
location.
Press
the
Allen
Wrench
(76)
into
the
Adhesive
Clip.
Make
sure
that
all
parts
are
tightened
before
you
use
the
treadmill.
Note:
To
protect
the
floor
or
carpet,
place
a
mat
under
the
treadmill.
For
information
on
ordering
a
mat,
see
ORDERING
REPLACEMENT
PARTS
on
the
back
cover.
4
Handrails
59
5
57
59
6
75
9
62
75
7
78
k
76
6