ProForm 550r Rower English Manual - Page 8
IMPORTANT: If the Console has
View all ProForm 550r Rower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5. Slide the Seat (23) to the front of the Rail (2). 5 Next, attach a Stop (32) to each side of the Rail (2) with an M4 x 19mm Screw (69). Then, attach the Rail Cap (38) to the Rail (2) with two M4 x 19mm Screws (69). 69 32 2 23 69 69 38 32 69 6. The Console (51) requires four AA batteries (not included); alkaline batteries are recommended. Do not use old and new batteries together or alkaline, standard, and rechargeable batteries together. IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before you insert batteries. Otherwise, you may damage the console display or other electronic components. Remove the screw (A) and the battery cover (B) from the top of the Console (51). Then, pull out the battery holder (C) and insert batteries (D) into the battery holder; make sure to orient the batteries as shown by the diagram inside the battery holder. Then, reinsert the battery holder and reattach the battery cover. See the inset drawing. Make sure that the batteries (D) are facing upward and that the contacts (E) on the batter holder (C) are facing downward when you insert the battery holder. 6 51 D BC A E D C E 7. Make sure that all parts are properly tightened before you use the rower. Extra parts may be included. Place a mat under the rower to protect the floor. 8