ProForm 560 Cross Trainer Treadmill English Manual - Page 7
Endcap Screws 14.
View all ProForm 560 Cross Trainer Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. With the help of a second person, carefully tip the treadmill onto its right side. Do not fully fold the treadmill until it is completely assembled. Insert the other Extension Leg (89) into the base of the Uprights (84). Hold an Extension Leg Nut (67) in the bottom of the Extension Leg, and thread a 2 1/4" Extension Leg Bolt (92) into the top of the Extension Leg. Next, thread a 2 1/2" Extension Leg Bolt (65) into the bottom of the Extension Leg. Firmly tighten the Extension Leg Bolts. Slide the other Front Endcap (44) onto the base of the Uprights (84). Partially tighten a Front Endcap Screw (14) into the Front Endcap and the base. 2 44 14 65 67 3. Attach two Base Pads (82) to the base of the Uprights (84) with two 1" Tek Screws (83). 3 83 82 84 92 89 84 83 82 4. With the help of a second person, carefully raise the Uprights (84) to a vertical position. Insert the Handrails (20) into the tubes at the top of the Upright (84). Make sure that the Handrails are turned so that the Handrail Bolts (64) can be threaded into the Handrails (see the inset drawing). Start both Handrail Bolts before tightening them. See steps 1 and 2. Fully tighten the two Front Endcap Screws (14). 4 20 84 20 7 64 20 64