ProForm 590 Spx Bike English Manual - Page 6

3. Identify the Right Pedal (35). 3 Using an adjustable wrench, firmly tighten the Right Pedal (35) clockwise into the Right Crank Arm (26). Tighten the Left Pedal (not shown) counterclockwise into the Left Crank Arm (not shown). 26 35 4. Orient the Handlebar Post (4) as shown. 4 Locate the Adjustment Knob (23) on the front of the Frame (1). Loosen the Adjustment Knob and pull it outward. Then, insert the Handlebar Post (4) into the Frame. Move the Handlebar Post (4) upward or downward to the desired position, release the Adjustment Knob (23) into an adjustment hole in the Handlebar Post, and then tighten the Adjustment Knob. Make sure that the Adjustment Knob is firmly engaged in an adjustment hole. 4 1 23 5. Attach the Handlebar (5) to the Handlebar Post (4) with the Handle (31) and the Handle 5 Washer (32). Note: The Handle (31) functions like a ratchet. Turn the Handle clockwise, pull the Handle outward, turn the Handle counterclockwise, push the Handle inward, and then turn the Handle clockwise again. Repeat this process until the Handle is tight. 5 4 32 31 6