ProForm 615 T Treadmill English Manual - Page 11

8. Set a Handrail (80) onto the Right Upright (85). Make sure that the Upright Wire (87) is not 8 pinched. Attach the Handrail (80) with two 5/16" x 2" Screws (4) and two 5/16" Star Washers (13). Start both Screws before tightening them. Attach the other Handrail (not shown) in the same way. Note: There is no wire on the left side. Remove and discard the two indicated screws (A) from both Handrails (80) (only one is shown). 4 13 A 80 87 85 9. Set the console assembly face down on a soft surface to avoid scratching the console assem- 9 bly. Remove the 1/4" x 1/2" Screws (9). Do not discard the Screws; the Screws will be used in assembly step 11. Identify the Left Tray (61) with the writing on the bottom. Attach the Left Tray with four #8 x 1/2" Screws (3). Start all four Screws before tighten- 9 ing them. Be careful not to overtighten the Screws. Attach the Right Tray (50) in the same way. 3 3 3 61 Console Assembly 3 50 9 11