ProForm 615 T Treadmill English Manual - Page 14

14. Identify the Left and Right Handrail Covers (83, 86). Slide the Left Handrail Cover (83) up against the console assembly and tighten a #8 x 3/4" Screw (1) into the bottom of the Cover. Be careful not to overtighten the Screw. Attach the Right Handrail Cover (86) in the same way. 14 Console Assembly 83 1 86 1 15. Raise the Frame (55) to the position shown. Have a second person hold the Frame until this step is completed. Orient the Storage Latch (51) so that the large barrel and the latch knob are oriented as shown. Attach the Latch Bracket (39) and the Storage Latch (51) to the Base (95) with two 3/8" x 2" Bolts (8) and two 3/8" Nuts (10). Attach the upper end of the Storage Latch (51) to the bracket on the Frame (55) with a 3/8" x 2" Bolt (8) and a 3/8" Nut (10). Note: It may be necessary to move the Frame back and forth to align the Storage Latch with the bracket. Lower the Frame (55) (see HOW TO LOWER THE TREADMILL FOR USE on page 22). 15 55 10 8 Latch Knob 51 Large Barrel 39 95 10 8 16. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 24 and 25). 14