ProForm 630 Weight Bench User Manual - Page 11

16. Attach the looped end of the Cable (45) to the Weight 16 Carriage (37) with an M10 x 19mm Bolt (8) and an M10 Nylon Locknut (1). 45 8 1 37 17. This step requires two people. Slide the Weight Carriage (37) onto the Lat Tower (9). Make sure that the Weight Carriage is oriented as shown. Insert the Pulley Bracket (60) into the Lat Tower (9). Attach the Pulley Bracket with two M10 x 65mm Bolts (67), four M10 Washers (6), and two M10 Nylon Locknuts (1). 17 6 67 6 1 6 60 9 37 18. Use the included socket tools to attach two Weight 18 Carriage Stops (38) to the Lat Tower (9) with the M6 x 73mm Bolt (7), two M6 Washers (50), and an M6 Nylon Locknut (2). Make sure the recessed sides of the Carriage Stops are facing away from the Lat Tower. Insert a small screwdriver through each socket tool to turn the socket tool. Slide a Weight Stop (62) onto the weight tube on the Weight Carriage (37). 62 Weight Tube 38 Recess 7 50 9 37 Recess 2 50 38 19. Insert the Lat Tower (9) into the Front Leg (19). The 19 Lat Tower must be turned as shown. Secure the Lat Tower with the Adjustment Knob (36). 9 36 19 11