ProForm 675 Cardio Cross Trainer Elliptical English Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included allen wrenches, assembly requires a phillips screwdriver , an adjustable wrench , and a rubber mallet . As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled. If a part is missing, call toll-free 1-888-533-1333. M8 Split Washer (28)-4 M10 Split Washer (45)-2 M8 Washer (71)-4 Handlebar Washer (55)-2 Pedal Leg Washer (35)-2 Wave Washer (69)-2 Large Wave Washer (72)-2 M8 Nylon Locknut (38)-4 M10 Nylon Locknut (33)-6 M4 x 22mm Screw (63)-2 M8 x 25mm Patch Screw (56)-2 M8 x 52mm Button Screw (27)-4 M10 x 27mm Patch Screw (40)-2 M10 x 74mm Button Bolt (7)-2 M10 x 75mm Carriage Bolt (34)-4 M8 x 45mm Button Bolt (50)-4 M10 Bolt Set (25)-2 5