ProForm 680 Lt Treadmill English Manual - Page 11

10. Have a second person hold the console assembly near the Right Handrail (105). Connect the Upright Wire (86) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. Insert the connectors and the excess wire into the Right Handrail. Set the console assembly on the Right Handrail (105) and the Left Handrail (not shown). Be careful not to pinch the wires. 10 Console Assembly Console Wire 105 86 Wire Tie Console Wire 86 11. Be careful not to pinch the wires in the Right Handrail (105). Attach the console assembly to the Right Handrail (105) with two #8 x 3/4" Screws (1), a 1/4" x 1 1/4" Bolt (6), and a 1/4" Star Washer (10). Repeat this step on the left side of the console assembly. Start all four Screws and both Bolts before tightening any of them. See steps 4 and 6-9. Tighten all of the bolts used in these assembly steps. 11 Console Assembly 105 1 10 6 11