ProForm 680 Lt Treadmill English Manual - Page 9

5. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (53) so the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated bolts (A) and the shipping bracket (B). Attach a Wheel (90) to the Base (60) with a 3/8" x 2" Bolt (3) and a 3/8" Locknut (11). Do not overtighten the Locknut; the Wheel must turn freely. Press a Base Cap (85) into the Base (60). 5 A 85 B 53 3 60 90 11 6. Hold a Bolt Spacer (84) inside the lower end of the Left Upright (77). Insert a 3/8" x 4" Bolt (5) with a 3/8" Star Washer (12) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (84), 3/8" x 4" Bolt (5), and 3/8" Star Washer (12). Hold the Left Upright Spacer (82) and the Left Upright (77) against the Base (60). Tighten the 3/8" x 4" Bolts (5) until the heads of the Bolts touch the Left Upright; do not fully tighten the Bolts yet. With the help of a second person, tip the treadmill so that the Base is flat on the floor. 6 5 12 84 84 60 77 82 7. Orient the Crossbar (78) so that the indicated bump is in the position shown. Attach the 7 Crossbar to the Left Upright (77) and the Right Upright (79) with four 1/4" x 5/8" Bolts (7); do not fully tighten the Bolts yet. 7 78 7 Bump 77 79 9