ProForm 720 Zlt Treadmill Uk Manual - Page 12
Lower the Frame 49 see HOW TO LOWER
View all ProForm 720 Zlt Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
10. Fully tighten the six 3/8" x 3 1/2" Screws (4) (three on each side). 10 4 4 11. Raise the Frame (49) to the position shown. Have a second person hold the Frame until 11 this step is completed. Orient the Storage Latch (51) so that the large barrel and the latch knob are oriented as shown. Attach the lower end of the Storage Latch (51) to the Base (80) with a 3/8" x 2" Bolt (13) and a 3/8" Nut (3). . Attach the upper end of the Storage Latch (51) to the Frame (49) with a 3/8" x 1 3/4" Bolt (12) and a 3/8" Nut (3). Lower the Frame (49) (see HOW TO LOWER THE TREADMILL FOR USE on page 22). 49 3 12 Latch Knob 51 Large Barrel 80 3 13 12. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 24 and 25). 12