ProForm 725tl English Manual - Page 7

5. Locate the section HOW TO FOLD THE TREADMILL FOR STORAGE on page 18. Follow the instructions to 5 fold the treadmill. Thread two more Handrail Bracket Screws (15) into the right Handrail Bracket (42) and Frame (83). Firmly tighten all four Screws in the Bracket. Thread two more Screws into the left Handrail Bracket and Frame (not shown). Firmly tighten all four Screws in the Bracket. 42 15 83 6. Refer to HOW TO LOWER THE TREADMILL FOR USE 6 on page 19. Follow the instructions to lower the treadmill. Align the holes in the Book Rack (101) with the holes in the Console Base (85). Attach the Book Rack with the four Console Screws (6) as shown. 101 6 6 85 7. Attach the Pulse Sensor (114) to the Headband (115). Make sure that the sensor window is pressed through the indicated hole in the Headband. Press open the clothes clip, and insert the pulse sensor wire into the clothes clip. Make sure that the pulse sensor wire is resting against the hinge of the clothes clip (see the inset drawing). The use of the pulse sensor is explained on page 8. 8. Remove the backing from the Adhesive Clip (90). Press the Clip onto the Upright Base (86) in the indicated location. Press the Allen Wrench (89) into the Clip. 7 Sensor 114 Window Clothes Clip Hinge Hole Clothes Clip 115 Pulse Sensor Wire 8 86 90 89 9. Make sure that all parts are tightened before you use the treadmill. Note: To protect the floor or carpet, place a mat under the treadmill. For information on ordering a mat, see REPLACEMENT PARTS on the back cover. 7