ProForm 730 Zlt Uk Manual - Page 11
If You Do Not Connect The Con
View all ProForm 730 Zlt manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
9. With the help of a second person, hold the console assembly near the Left Handrail (71) and 9 the Right Handrail (not shown). Connect the Upright Wire (70) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. Console Wire 70 Console Assembly 70 71 Wire Tie Console Wire 10. Set the console assembly on the Left and Right Handrails (71, 72). Make sure that no wires are pinched. Insert the excess Upright Wire (70) into the Left Handrail. Attach the console assembly to the brackets on the Handrails (71, 72) with two 5/16" x 1" Screws (7) and two 5/16" Star Washers (8). Start both Screws, and then tighten them. 10 Console Assembly 72 8 7 70 71 8 7 11