ProForm 730 Zlt Uk Manual - Page 13
Lower the Frame 49 see HOW TO LOWER
![]() |
View all ProForm 730 Zlt manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
13. Raise the Frame (49) to the position shown. Have a second person hold the Frame during 13 the next two assembly steps. Attach the Latch Crossbar (96) to the Frame (49) with two 1/4" x 1 3/4" Screws (97). 49 97 96 14. Orient the Storage Latch (51) so that the large barrel and the latch knob are in the positions 14 shown. Attach the lower end of the Storage Latch (51) to the Base (80) with an M8 x 50mm Bolt (104) and an M8 Nut (90). 49 Attach the upper end of the Storage Latch (51) to the Latch Crossbar (96) with an M8 x 45mm Bolt (12) and an M8 Nut (90). 90 96 12 51 Attach two Wheels (81) to the Base (80) with two 3/8" x 2 1/2" Bolts (2) and two 3/8" Nuts (3). Do not overtighten the Nut; the Wheel must turn freely. Latch Knob Lower the Frame (49) (see HOW TO LOWER THE TREADMILL FOR USE on page 21). 2 81 3 Large Barrel 90 80 104 3 2 81 15. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the oor or carpet, place a mat under the treadmill. Note: Extra parts may be included. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 23 and 24). 13
![](/manual_guide/products/proform-730-zlt-treadmill-uk-manual-2c911eb/13.png)