ProForm 770 Ekg Treadmill Canadian English Manual - Page 8
Operation And Adjustment, Danger - belt
View all ProForm 770 Ekg Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
OPERATION AND ADJUSTMENT THE PERFORMANT LUBETM WALKING BELT electric shock. This product is equipped with a cord having an equipment-grounding conductor and a Your treadmill features a walking belt coated with grounding plug. Plug the power cord into a surge PERFORMANT LUBETM, a high-performance lubricant. suppressor, and plug the surge suppressor into an Important: Never apply silicone spray or other sub- appropriate outlet that is properly installed and stances to the walking belt or the walking platform. grounded in accordance with all local codes and They will deteriorate the walking belt and cause ex- ordinances. cessive wear. This product is for use on a nominal 120-volt circuit, HOW TO PLUG IN THE POWER CORD and has a grounding plug that looks like the plug illus- trated in drawing 1 below. A temporary adapter that looks like the adapter illustrated in drawing 2 may be DANGER: Improper connection of the equipment-grounding conductor can result in an increased risk of electric shock. used to connect the surge suppressor to a 2-pole receptacle as shown in drawing 2 if a properly grounded outlet is not available. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product-if it will The temporary adapter should be used only until a properly grounded outlet (drawing 1) can be installed by a qualified electrician. not fit the outlet, have a proper outlet installed by a qualified electrician. The green-colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Your treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden voltage changes in your home's power. Voltage surges, spikes, and noise interference can result from weather conditions or from other appliances Whenever the adapter is used it must be held in place by a metal screw. Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified electrician to determine if the outlet box cover is grounded before using an adapter. being turned on or off. To decrease the possi- bility of your treadmill 1 being damaged, al- ways use a surge sup- pressor (not included) Grounded Outlet Box Grounding Pin Treadmill Power Cord with your treadmill. Grounding Plug Grounding Plug Surge suppressors are sold at most hardware stores and department stores. Use only a CUL- listed surge suppressor, rated at 15 amps, with a 1 mm2 (14-gauge) cord 2 of 1.5 m (5 ft.) or less in length. Grounded Outlet Grounded Outlet Box Adapter Grounding Pin This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of Lug Metal Screw Grounding Pin Grounding Plug Surge Suppressor 8