ProForm 785 Space Saver Instruction Manual - Page 6

5. See drawing 5A. Move your right hand to the position shown, and hold the treadmill firmly. Using your left hand, 5A lift the Storage Latch (125). Raise the treadmill until the 125 locking pin snaps into the Storage Latch. It may be nec- essary to move the Upper Body Arms (12) to the sides slightly (see drawing 5B). Make sure that the locking pin is inside the Storage Latch, and that the Storage 5B 12 Latch is fully closed. Locking Pin 6. See drawing 6B. Attach a Base Pad (73) to the bottom of the Stabiliser Plate (88) in the indicated location. 6A See drawing 6A. Stand behind the treadmill. Hold the Left Crossbar Bracket (4) and the Right Crossbar Bracket (not shown). Place one foot on the Base (75) in the indicated location. Tip the treadmill back slightly. Whilst the treadmill is held in this position, a second person should slide the Stabiliser Plate (88) onto the Base (see drawing 6C). Keeping your foot on the Base, carefully tip the treadmill up until it is resting on the Base. Make sure that the Stabiliser Plate (88) stays on the Base. See drawing 6C. Attach the Stabiliser Plate (88) to the Base (75) with a Stabiliser Plate Bolt (105), two Stabiliser Plate Washers (97), and the Stabiliser Plate Nut (95) as shown. 6C Before moving the treadmill, see HOW TO MOVE THE TREADMILL on page 18. 7. Refer to assembly drawing 5 at the top of this page. Hold the upper end of the treadmill with your right hand as 7 shown. Using your left hand, lift the Storage Latch (125). Pivot the treadmill slightly until the locking pin is out of the storage latch. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. To decrease the possibility of injury, bend your legs and keep your back straight. 6B 88 4 73 88 75 95 97 105 75 88 8. Remove the paper backing from the Adhesive Clip (44). Press the Adhesive Clip onto the Frame (84) in the indi- 8 cated location. Press the Allen Wrench (57) into the Adhesive Clip. 6 44 57 84 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, lift the storage latch. Pivot the treadmill slightly until the locking pin is out of the storage latch. Close the storage latch. Storage Latch Locking Pin 2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. To decrease the possibility of injury, bend your legs and keep your back straight. 19