ProForm 790t Treadmill English Manual - Page 10
the #10 x 3/4 Flat Head Screws 112.
View all ProForm 790t Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
7. Attach the Left Handrail (88) to the Left Upright 7 (89) with two 5/16" x 1" Screws (5), two 5/16" Star Washers (11), and a 5/16" x 1 1/4" Bolt (4). Do not fully tighten the Screws and Bolt yet. 87 Attach the Right Handrail (87) in the same way. 11 5 4 88 89 8. Set the console assembly face down on a soft 8 surface to avoid scratching the console assem- bly. Remove the two indicated Screws (A). Next, lift off the Crossbar (93). Discard the two Screws. A 93 Console Assembly 9. IMPORTANT: To avoid damaging the 9 Crossbar (93), do not use power tools and do not overtighten the #10 x 3/4" Screws (9) or the #10 x 3/4" Flat Head Screws (112). Orient the Crossbar (93) as shown. Attach the Crossbar to the Handrails (87, 88) with two #10 x 3/4" Flat Head Screws (112), two #10 x 3/4" Screws (9), and two 1/4" Star Washers (35) as shown. Start all four Screws, and then tighten each of them. 93 9 112 35 88 9 112 35 87 10