ProForm 975s Bike User Manual - Page 7

9. Attach the Backrest (15) to the Seat Bracket (69) 9 with four M6 x 16mm Hex Head Screws (24). 15 69 10. Identify the Left Pedal (45) (there is an ÒLÓ on the 10 Left Pedal for identification). Using an adjustable wrench, tighten the Left Pedal counterclockwise into the left arm of the Crank (29). 27 Tighten the Right Pedal (not shown) clockwise into 29 the right arm of the Crank (29). 45 Adjust the Pedal Strap (27) on the Left Pedal (45) to the desired position. Press the Pedal Strap onto the adjustment tab on the Left Pedal. Tab Adjust the Pedal Strap on the Right Pedal (not shown) in the same manner. 11. The Console (8) requires either two or three ÒAAÓ 11 batteries (not included); alkaline batteries are recommended. Open the battery cover (not shown) on the back of the Console. Press the batteries into the battery clip. Make sure that the negative (Ð) ends of the batteries are touching the springs. Close the battery cover. Note: If the battery clip holds three batteries, you must insert three batteries. 24 8 Batteries Battery Clip 12. Make sure that all parts are properly tightened before you use the PROFORM ¨ 975s. 7