ProForm 985r English Manual - Page 6
the Frame 1. Attach the Carriage Bar to the Frame
View all ProForm 985r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1. Attach the Front Stabilizer (2) to the front of the 1 Frame (1) with two M10 x 70mm Carriage Bolts (72) 72 and two M10 Nylon Locknuts (45). Make sure that the Front Stabilizer is turned so the Wheels (75) are not touching the floor. 75 2 2. Slide the Carriage Bar (7) onto the indicated tube on the Frame (1). Attach the Carriage Bar to the Frame with four M10 x 25mm Button Screws (74) and four M10 Split Washers (17). If the Seat Carriage (11) is not on the Carriage Bar (7), pivot the Seat Handle (79) to the position shown and slide the Seat Carriage onto the Carriage Bar. Move the Seat Carriage to the desired position and pivot the Seat Handle forward to secure the Seat. 2 1 17 17 74 17 1 45 74 17 11 79 7 3. Position the Rear Stabilizer (3) under the Carriage 3 Bar (7) as shown. Attach the Rear Stabilizer to the Carriage Bar with three M8 x 100mm Button Bolts 63 63 (63) and three M8 Washers (90). 90 90 7 3 6