ProForm Crosswalk 395 Treadmill English Manual - Page 12
Attach the Latch Housing 67 with the Latch
View all ProForm Crosswalk 395 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
11. Attach the Latch Housing (67) with the Latch Spacer (82) to the Left Upright (66) with two #10 11 x 1 1/2" Screws (8); make sure that the knob is on the indicated side. Start both Screws, and then tighten them. Be careful not to over- tighten the Screws. 82 67 Knob 8 66 12. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see page 21). 12
12
11
11. Attach the Latch Housing (67) with the Latch
Spacer (82) to the Left Upright (66) with two #10
x 1 1/2" Screws (8);
make sure that the knob is
on the indicated side. Start both Screws, and
then tighten them. Be careful not to over-
tighten the Screws.
12.
Make sure that all parts are properly tightened before you use the treadmill.
If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used
to adjust the walking belt (see page 21).
67
82
8
66
Knob