ProForm Crosswalk1.50 Hp Owners Manual - Page 8
Trouble, Shooting, Maintenance
View all ProForm Crosswalk1.50 Hp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
TROUBLE-SHOOTING AND MAINTENANCE Most problems can be solved by following the simple steps below. If further assistance is needed, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). 1. SYMPTOM: THE POWER DOES NOT TURN ON a. Make sure that the power cord is plugged in properly. (See OPERATION AND ADJUSTMENT.) If an extension cord is needed, use only a 14-gauge general-purpose cord of approximately five feet in length. b. Make sure that the safety key is inserted fully into the console. Turn the speed control knob to the "reset" position. (See OPERATION AND ADJUSTMENT.) c. Check the circuit breaker located on the front of the frame. The circuit breaker is designed to protect the electrical system. If the circuit breaker has tripped, the switch will protrude as shown. To reset the circuit breaker, allow the CROSS WALK to cool for five minutes, and then push the switch back in. Tripped Reset 2. SYMPTOM: THE POWER TURNS OFF DURING USE a. Make sure that the power cord is plugged in. 6. Check the circuit breaker located on the front of the frame. If the circuit breaker has tripped, the switch will protrude. (See the drawing above.) To reset the circuit breaker, allow the CROSS WALK to cool for five minutes, and then push the switch back in. c. Remove the safety key from the console. Reinsert the safety key fully into the console. Turn the speed control knob to the "reset" position. 3. SYMPTOM: THE MOTIVATIONAL FITNESS MONITOR DOES NOT FUNCTION PROPERLY a. Check the batteries in the console. (See OPERATION AND ADJUSTMENT.) Most problems are the result of drained batteries. 4. SYMPTOM: THE PULSE EARCUP DOES NOT FUNCTION PROPERLY a. Make sure that the pulse earclip is plugged fully into the console. Attach the clothes clip to your collar. b. Rub your left ear lobe and reposition the earclip. c. • Try-standing still while measuringyour pulse. . d. The pulse earclip may need to be cleaned. Press the earclip open, and wipe the two clear circles inside the earlip; using a cotton swab saturated with denatured alcohol: A WARNING: Thepulse eardip is not a medical device. Various factors, including your move- ment while exercising, may affect theaccuracy of heart rate readings. The earclip is intended only as an 8 exercise aid in determining heart rate trends in general.