ProForm Ergo Strider 3.0 Elliptical English Manual - Page 5

ASSEMBLY To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480. Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included tool(s) and your own Phillips screwdriver wrench , and rubber mallet . , adjustable As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled. M6 Locknut (77)-6 Wave Washer M6 x 16mm x M10 Bright Split M10 Black Split (88)-2 1.5mm Washer Washer (78)-4 Washer (96)-6 (36)-2 M6 x 25mm x 1.5mm Washer (33)-2 M4 x 12mm Screw (35)-10 M4 x 16mm Screw (84)-14 M4 x 16mm Round Head Screw (94)-4 M4 x 32mm Screw (95)-2 M6 x 16mm Patch Screw (80)-2 M6 x 36mm Bolt (76)-4 M6 x 71.5mm Shoulder Bolt (31)-2 M10 x 20mm Patch Screw (79)-4 M10 x 35mm Shoulder Screw (63)-2 M10 x 70mm Patch Screw (75)-6 5