ProForm Ergo Strider 3.0 Elliptical English Manual - Page 6
Repeat this step to attach the other Frame
View all ProForm Ergo Strider 3.0 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1. To make assembly easier, read the 1 information on page 5 before you begin. While another person lifts the rear of the Frame (1), attach a Frame Cover (48) to the Frame with two M4 x 16mm Screws (84). Repeat this step to attach the other Frame Cover (48). 48 84 48 1 84 2. Attach a Wheel (50) to the front of the Frame (1) with an M10 x 35mm Shoulder Screw (63). Repeat this step to attach the other Wheel (50). 2 63 50 1 50 63 6
6
2.
Attach a Wheel (50) to the front of the Frame
(1) with an M10 x 35mm Shoulder Screw (63).
Repeat this step to attach the other Wheel
(50).
2
48
1
1
84
63
50
1
63
50
84
48
1.
While another person lifts the rear of the Frame
(1), attach a Frame Cover (48) to the Frame
with two M4 x 16mm Screws (84).
Repeat this step to attach the other Frame
Cover (48).
To make assembly easier, read the
information on page 5 before you begin.