ProForm Fit 425 Treadmill English Manual - Page 11

6. Slide the Right Inner Upright Cap (100) between the Right Upright (95) and the Motor Hood (69). 6 Press the Right Outer Upright Cap (101) against the Right Inner Upright Cap until they snap together. Repeat this step on the left side of the treadmill. 95 100 69 101 7. Attach the Latch (93) to the Left Upright (94) with two #10 x 1" Screws (7); start both Screws, 7 and then tighten them. 94 93 7 8. Make sure that all parts are properly tightened before you use the treadmill. To protect the floor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure place. One of the hex keys is used to adjust the walking belt (see page 23). Note: Extra parts may be included. 11