ProForm Fit 425 Treadmill English Manual - Page 9
Pivot the Right and Left Rear Feet 66, 67 down
View all ProForm Fit 425 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
2. Make sure that the power cord is unplugged. 2 Pivot the Right and Left Rear Feet (66, 67) down from the shipping position as shown. With the help of a second person, carefully raise the Left and Right Uprights (94, 95) to the vertical position. IMPORTANT: Do not use the treadmill with the Rear Feet (66, 67) in the shipping position. 94 95 67 66 3. Tighten a 3/8" x 2 1/4" Screw (1) and a 3/8" x 3/4" Screw (4) into the Base (83) and the Right 3 Upright (95) as shown; do not fully tighten the Screws yet. Repeat this step on the left side (not shown). Then, tighten all four Screws (1, 4). 95 1 4 83 9
9
2.
Make sure that the power cord is unplugged.
Pivot the Right and Left Rear Feet (66, 67) down
from the shipping position as shown.
With the help of a second person, carefully
raise
the Left and Right Uprights (94, 95) to the verti-
cal position.
IMPORTANT: Do not use the treadmill
with the Rear Feet (66, 67) in the shipping
position.
94
2
95
3
4
83
95
1
67
66
3.
Tighten a 3/8" x 2 1/4" Screw (1) and a 3/8" x
3/4" Screw (4) into the Base (83) and the Right
Upright (95) as shown;
do not fully tighten the
Screws yet.
Repeat this step on the left side (not shown).
Then, tighten all four Screws (1, 4).