ProForm Fusion 2.1t English Manual - Page 10
Attach the Pad Frame 11 to the Assist Arm 9 - tether
View all ProForm Fusion 2.1t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
10. Attach the Pad Frame (11) to the Assist Arm (9) 10 with two M8 x 20mm Button Screws (43), two M8 Washers (37), and two 5mm Spacers (38). 43 37 38 9 11 38 37 43 11. Attach the Knee Pad Cover (14) and the Knee 11 Pad (15) to the Pad Frame (11) with two M6 x 75mm Button Screws (47) and two M6 Washers (36). 15 14 11 47 36 47 12. Fully insert an Adjustment Pin (29) through the 12 indicated hole in the Rear Upright (5) and through the Assist Arm (9). Attach the tether on the Adjustment Pin (29) to the Rear Upright (5) with an M4 x 12mm Screw (49). 9 5 49 29 10
10
12. Fully insert an Adjustment Pin (29) through the
indicated hole in the Rear Upright (5) and through
the Assist Arm (9).
Attach the tether on the Adjustment Pin (29) to
the Rear Upright (5) with an M4 x 12mm Screw
(49).
11.
Attach the Knee Pad Cover (14) and the Knee
Pad (15) to the Pad Frame (11) with two M6 x
75mm Button Screws (47) and two M6 Washers
(36).
11
12
47
14
15
11
47
36
49
29
5
9
10. Attach the Pad Frame (11) to the Assist Arm (9)
with two M8 x 20mm Button Screws (43), two M8
Washers (37), and two 5mm Spacers (38).
10
9
11
43
43
37
37
38
38