ProForm Performance 1050 Treadmill English Manual - Page 10
If You Do Not Connect The Con
View all ProForm Performance 1050 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
7. Set the console assembly face down on a soft surface to avoid scratching the console assembly. Remove and save the four 1/4" x 1/2" Screws (9). They will be used in step 9. Identify the Left Tray (90). Attach the Left Tray with four #8 x 1/2" Screws (10). Start all four Screws before tightening them. Be careful not to overtighten the Screws. Attach the Right Tray (85) in the same way. 7 9 10 10 10 90 Console Assembly 10 85 9 8. With the help of a second person, hold the console assembly near the Left Upright (75). 8 Connect the Upright Wire (70) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. If YOU DO NOT CONNECT the connectors properly, the console may become damaged when you turn on the power. Then, remove the wire tie from the Upright Wire. Console Wire 70 Console Assembly Console Wire 70 Wire Tie 75 10