ProForm Performance 1850 Instruction Manual - Page 12
not overtighten the #10 x 3/4 Screws 9., start both Screws, and then tighten them.
![]() |
View all ProForm Performance 1850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
10. Identify the Right and Left Trays (27, 36). Attach the Trays (27, 36) to the Console Base (64) with eight #8 x 1/2" Screws (1); do not overtighten the Screws. Reattach the Console Frame (18) with the six #8 x 3/4" Screws (2) and the two Console Clamps (41) that you removed in step 9; do not overtighten the Screws. 10 2 2 18 1 27 1 41 2 41 2 1 1 64 36 11. IMPORTANT: To avoid damaging the Pulse Crossbar (93), do not use power tools and do not overtighten the #10 x 3/4" Screws (9). Orient the Pulse Crossbar (93) as shown. Attach 11 9 86 28 5 G the Pulse Crossbar to the Handrails (86) with two #10 x 3/4" Screws (9) and two #10 Star Washers 93 (5); start both Screws, and then tighten them. Make sure not to pinch the Upright Wire (81) or the handrail wires (G). Next, firmly tighten the four 5/16" x 2 1/2" Screws (28). Then, remove the wire tie from the Upright Wire (81). 9 5G 28 86 81 Wire Tie 12
![](/manual_guide/products/proform-petl14715-instruction-manual-d23a4c4/12.png)