ProForm Performance 410i Uk Manual - Page 13
start all, eleven Screws, and then tighten them. Make, sure that no wires are pinched., do
 |
View all ProForm Performance 410i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
12. Slide the Right and Left Handrail Grips (74, 79) over the Right and Left Handrail Covers (not 12 shown) and against the console assembly (F). Attach the Handrail Grips (74, 79) with two #8 x 1/2" Screws (1); do not overtighten the Screws. F 79 1 1 74 13. Hold the Pulse Bar (85) near the console assembly (F). Connect the two pulse wires (H), and connect the Console Ground Wire (58) to the ground wire (I) from the console assembly (F). Attach the Pulse Bar (85) to the Pulse Crossbar (93) with eleven #8 x 1/2" Screws (1); start all eleven Screws, and then tighten them. Make sure that no wires are pinched. 13 85 93 1 1 58 1 F H I 13
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
13
13. Hold the Pulse Bar (85) near the console assem-
bly (F). Connect the two pulse wires (H), and
connect the Console Ground Wire (58) to the
ground wire (I) from the console assembly (F).
Attach the Pulse Bar (85) to the Pulse Crossbar
(93) with eleven #8 x 1/2" Screws (1);
start all
eleven Screws, and then tighten them. Make
sure that no wires are pinched.
12. Slide the Right and Left Handrail Grips (74, 79)
over the Right and Left Handrail Covers (not
shown) and against the console assembly (F).
Attach the Handrail Grips (74, 79) with two
#8 x 1/2" Screws (1);
do not overtighten the
Screws.
12
79
F
74
1
1
13
1
85
H
I
93
1
1
58
F