ProForm Performance 650 Treadmill Uk Manual - Page 10
If You Do Not Connect The Con
View all ProForm Performance 650 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
6. IMPORTANT: To avoid damaging the Crossbar (80), do not use power tools and do 6 not overtighten the #8 x 3/4" Silver Screws (2). 2 8 Orient the Crossbar (80) as shown. Attach the Crossbar to the Handrails (74, 75) with four 74 #8 x 3/4" Silver Screws (2) and four 1/4" Star Washers (8). Start all four Screws, and then tighten them. 80 2 8 75 7. With the help of a second person, hold the console assembly near the Left Upright (78). 7 Insert the end of the Upright Wire (77) through the looped plastic tie. Connect the Upright Wire (77) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. Console Wire 77 Console Assembly Plastic Tie Wire Tie 78 Console Wire 77 10